Metal Trim & Flashing
for Every Vulnerable Point on Your Roof.

Ridges, valleys, and eaves are where roofs actually leak properly fitted trim is what seals them.

A roof rarely fails in the middle of a panel it fails at the seams, ridges, valleys, and edges, where two surfaces meet and water is looking for a way in. Below is every standard trim piece we stock, what it does, and where it goes. Standard lengths run 12′ 6″, and with our 20′ computerized break, we can cut gable (rake) and outside corner trim in two-foot increments all the way to 20′ so a long wall or roofline doesn’t need an ugly mid-run seam.

Standard Trim Pieces

(Spec details like leg length and gauge should be confirmed from your spec sheets I’ve written the function of each piece; add the exact measurements where noted.)

Covers the peak where two roof slopes meet, sealing out wind-driven rain and snow at the highest point on the roof.

Matches the Standing Seam panel profile at the ridge for a continuous, hidden-fastener finish no visible hardware breaking up the clean look.

Does the same job as a standard ridge cap, shaped to fit hip roof lines where slopes meet at an angle instead of a straight peak.

Channels water down the valleys where two roof slopes meet one of the highest-risk leak points on any roof, especially under heavy snowmelt.

A snow retention piece that holds snow load on the roof instead of letting it release in a sheet protects walkways, parked vehicles, and people below from sudden snow.

Finishes the lower roof edge, directing water off the panel and into the gutter while sealing out wind-driven rain from underneath.

An alternate eave trim profile for the lower roof edge.

Finishes the sloped roof edge (gable end), sealing the panel edge from wind-driven rain coming in sideways.

An alternate gable (rake) trim profile for the sloped roof edge.

Need a Custom Profile or Length?

With our 20′ computerized break, we cut gable and outside corner trim in two-foot increments from 12′ through 20′ and we can build fully custom trim to your specs. Bring us your plans and we’ll match the profile.

Get A Fast Quote